KEVOS® MAKEOS · Manufacturing
Machine Spindle Speed Range Design (Geometric Series and Speed Loss)
What spindle speed range covers my diameters and cutting speeds, what step ratio do my number of speeds give, and how much cutting speed is lost between steps?
Design of a stepped spindle speed range for a machine tool: lowest and highest speeds needed from the work diameter range and cutting speed range, the geometric step ratio for the number of speeds (as the speed series tool), the nearest preferred-number series, the largest cutting speed loss between neighbouring speeds, the number of speeds needed for your largest acceptable loss, and the list of speeds.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Smallest work (or tool) diameter | mm | Smallest diameter machined (with the highest cutting speed). |
| Largest work (or tool) diameter | mm | Largest diameter machined (with the lowest cutting speed). |
| Lowest cutting speed | m/min | Lowest cutting speed needed (tough materials, large diameters). |
| Highest cutting speed | m/min | Highest cutting speed needed. |
| Number of speeds | Number of spindle speeds the gearbox gives. | |
| Largest acceptable speed loss between steps | % | Largest loss of cutting speed you accept when the ideal speed falls between two steps. |
Method and formulas
- n_min = 1000 v_min ÷ (π d_max); n_max = 1000 v_max ÷ (π d_min); range R = n_max ÷ n_min.
- Step ratio φ = R^(1/(z − 1)) (as the speed series tool); largest loss = 1 − 1 ÷ φ.
- Speeds needed for a loss limit: z = 1 + ln R ÷ ln[1 ÷ (1 − loss)], rounded up.
- Example: 95.493–4,774.6 rpm in 18 speeds gives φ = 1.2587 (nearest R10) and up to 20.556% speed loss.
Limitations
- Constant step ratio; many gearboxes merge or overlap steps at the ends.
- Cutting speed limits only; power and torque limits at low speed need their own check.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Lay out the speeds of a lathe or drill gearbox
- Check whether a stepped drive is fine enough
- Compare the speed loss of 12 and 18 speeds
Who it is for
- Machine tool designers
- Manufacturing engineers
- Process planners
What you get
- Lowest and highest spindle speeds
- Step ratio and nearest preferred series
- Speed loss and speeds needed
Interpreting the result
- Ratios of 1.26 (R10) suit general turning; 1.12 (R20) suits production machines where speed loss costs tool life.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 37–39. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
Open the Machine Spindle Speed Range Design (Geometric Series and Speed Loss) calculator
