KEVOS® MAKEOS · Quality
ISO Tolerance Grade (IT) Value
How large is the ISO IT tolerance grade for this nominal size?
Standard tolerance for ISO 286 grades IT5 to IT16 calculated from the standard tolerance unit for the size step that contains the nominal size.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Nominal size | mm | Basic size of the feature from the drawing (up to 3150 mm). |
| Tolerance grade | choice | The IT grade specified or being considered. |
Method and formulas
- D = geometric mean of the ISO 286 size step containing the size (√(lower × upper); the first step uses 1 and 3 mm).
- Up to 500 mm: i = 0.45∛D + 0.001D µm. Above 500 mm: I = 0.004D + 2.1 µm.
- IT = k × i, with k = 7, 10, 16, 25, 40, 64, 100, 160, 250, 400, 640, 1000 for IT5 to IT16.
- Example: 25 mm in IT7 lies in the 18–30 mm step; the formula gives 20.918 µm.
Limitations
- ISO 286-1 tabulates rounded values; use the table value on drawings. The formula value can differ by about 1 µm or by rounding steps for coarse grades.
- Grades finer than IT5 use different formulas and are not covered.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Estimate the tolerance for a chosen IT grade
- Compare grades for a process capability discussion
- Check a fit tolerance quickly
Who it is for
- Design engineers
- Quality engineers
- Machinists
What you get
- Formula tolerance value
- Size step and its geometric mean
- Standard tolerance unit
Interpreting the result
- Use the result to compare grades; take limits for specific fits (e.g. H7/g6) from ISO 286-2.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 635–668. Topic reference; no source tables or recommended settings are reproduced.
- ISO 286-1:2010 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — https://www.iso.org/standard/45975.html
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
