KEVOS® MAKEOS · Manufacturing
Dividing-Head Setting for Fluting Angular Cutters and Taper Reamers
At what angle do I set the dividing head to flute the teeth of this angular cutter or taper reamer?
Dividing-head setting angle for cutting teeth in the conical face of an angular milling cutter or a taper reamer with a single-angle fluting cutter, from the number of teeth, the angle of the blank and the angle of the fluting cutter, including the case of a flat (0°) blank.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Number of teeth | Number of teeth to be cut. | |
| Angle of the blank | ° | Angle of the blank in which the teeth are cut (0 for a flat face). |
| Angle of the fluting cutter | ° | Angle of the single-angle fluting cutter. |
Method and formulas
- tan D = cos(360° ÷ N) × cot B.
- sin E = tan(360° ÷ N) × cot C × sin D.
- Setting angle A = D − E; for a 0° blank this reduces to cos A = tan(360° ÷ N) × cot C.
- Handbook example: 9 teeth, 35° blank, 55° cutter → A = 21° 52′.
- Example: 9 teeth in a 35° blank with a 55° cutter need the head at 21° 52.2′.
Limitations
- Single-angle fluting cutters; check that the setting gives the land width wanted.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Set up to flute an angular cutter or countersink
- Cut teeth on a taper reamer blank
- Check a fluting set-up angle
Who it is for
- Toolmakers
- Machinists
- Cutter grinders
What you get
- Dividing-head setting angle A
- Intermediate angles D and E
- Index angle between teeth
Interpreting the result
- Take a trial cut and check the land width before fluting all teeth.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 833–834. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
Open the Dividing-Head Setting for Fluting Angular Cutters and Taper Reamers calculator
