KEVOS® MAKEOS · Mechanics
Toggle Joint Force
What output force does this toggle joint produce for the applied force?
Output (resisting) force and mechanical advantage of an equal-arm toggle joint from the applied force and the link angle, for clamps, presses and crushers.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Force applied at the joint (perpendicular to the output line) | N | Force applied to the central joint, at right angles to the line along which the output moves. |
| Angle of each link from the output line | ° | Angle between each link and the output line; it falls towards zero as the links straighten. |
Method and formulas
- From the handbook relation 2R sin α = P cos α: output R = P ÷ (2 tan α).
- Each link carries P ÷ (2 sin α).
- Example: 500 N at 10° gives 1,417.8 N output, a mechanical advantage of 2.8356.
Limitations
- Frictionless pins and rigid links; near the straight position, elasticity and clearances limit the real force.
- The output force grows without limit as the angle approaches zero in theory only.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Size toggle clamps and press linkages
- Show how force rises near the straight position
- Check actuator force for a toggle
Who it is for
- Design engineers
- Maintenance engineers
- Machine builders
What you get
- Output force
- Mechanical advantage
- Force on each link
Interpreting the result
- Design the frame and pins for the force at the smallest working angle.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 172–174. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
