KEVOS® MAKEOS · Mechanics
Three-Point Support Loads (Reaction at Each Support, Uplift, Capacity)
For a machine, plate or frame resting on three supports, how much load does each support carry from the loads on it, and does any support lift off?
Load share of a rigid body on three supports from up to three vertical loads: the three equilibrium equations (total load, and moments about the X and Y axes) solved by inverting the 3 × 3 matrix of support positions (as the 3 × 3 matrix tool), giving each support reaction, then the check that every reaction is upward (the combined load lies inside the support triangle) and within its capacity.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Support 1 | ||
| X | mm | X of support 1. |
| Y | mm | Y of support 1. |
| Support 2 | ||
| X | mm | X of support 2. |
| Y | mm | Y of support 2. |
| Support 3 | ||
| X | mm | X of support 3. |
| Y | mm | Y of support 3. |
| Load 1 | ||
| Load (0 = unused) | N | Load 1 (weight, downward). |
| X | mm | X of load 1. |
| Y | mm | Y of load 1. |
| Load 2 | ||
| Load (0 = unused) | N | Load 2. |
| X | mm | X of load 2. |
| Y | mm | Y of load 2. |
| Load 3 | ||
| Load (0 = unused) | N | Load 3. |
| X | mm | X of load 3. |
| Y | mm | Y of load 3. |
| Capacity | ||
| Capacity of each support | N | Load each support (foot, mount, jack) can carry. |
Method and formulas
- Equilibrium: R₁ + R₂ + R₃ = ΣW; Σ R x = Σ W x; Σ R y = Σ W y.
- Matrix of [1 1 1; x₁ x₂ x₃; y₁ y₂ y₃] inverted (as the 3 × 3 matrix tool); reactions = inverse × [ΣW, ΣWx, ΣWy].
- A negative reaction means the load lies outside the support triangle and that support lifts.
- Example: supports carry 2,712.5, 1,912.5 and 2,375 N.
Limitations
- Rigid body and supports at one level; three supports always share load statically, four or more do not.
- Vertical loads only.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Find the load on each foot of a three-legged machine or table
- Place a heavy item on a three-point base
- Check a kinematic mount or levelling feet
Who it is for
- Design engineers
- Riggers
- Machine installers
What you get
- Total load and where it acts
- Reaction at each support
- Uplift and capacity checks
Interpreting the result
- With three supports the share depends only on where the loads are, not on stiffness, which is why precision instruments stand on three feet.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 122–125, 153–163. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
Open the Three-Point Support Loads (Reaction at Each Support, Uplift, Capacity) calculator
