KEVOS® MAKEOS · Mechanics
Sling Leg Tension
What tension does each sling leg carry at this angle, and is it within the rating?
Tension in each leg of a multi-leg sling from the load mass, the number of legs assumed to share the load and the leg angle from vertical.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Load mass | kg | Load mass including lifting beams and attachments below the hook. |
| Legs assumed to share the load | legs | Number of legs that carry load; many codes count only two legs of a three- or four-leg sling unless load sharing is assured. |
| Leg angle from vertical | ° | Angle of each leg from vertical (half the included angle). |
| Working load limit per leg | kg | Working load limit of one leg as marked on the sling tag (in a straight vertical pull). |
Method and formulas
- Tension per leg = m g ÷ (n cos β), where n is the number of legs sharing the load and β the angle from vertical.
- Angle factor = 1 ÷ cos β; the leg tension in kilograms-force = mass ÷ (n cos β).
- Example: 2000 kg on 2 legs at 30° from vertical puts 1,154.7 kg in each leg.
Limitations
- Symmetrical load with legs at equal angles; an off-centre centre of gravity loads legs unequally.
- This is a calculation aid, not a lift plan; follow your lifting code and a competent person’s assessment.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Check slings and shackles before a lift
- Plan sling length to keep angles small
- Explain why wide sling angles overload legs
Who it is for
- Riggers and supervisors
- Maintenance planners
- Lifting engineers
What you get
- Tension per leg
- Angle factor
- Leg tension against the WLL
Interpreting the result
- Shorten the angle (longer legs) or use a spreader beam when the tension is near the rating.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 2613–2650. Topic reference; no source tables or recommended settings are reproduced.
- AS 1418 and AS 3775 series (cranes and chain slings) or your national lifting code — consult the current editions
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
