KEVOS® MAKEOS · Geometry
Rollers Around a Shaft and Circles in Circles
What size rollers fit around this shaft, how big a circle holds N equal circles, or how many circles fit in a rectangle?
Diameter of equal rollers fitting around a shaft (or the shaft for given rollers), the enclosing circle for up to ten equal circles, and the number of equal circles in a rectangle by square and hexagonal packing.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Problem | choice | Which packing problem to solve. |
| Number of rollers or circles | items | Number of rollers around the shaft, or circles inside the circle (rectangle mode ignores it). |
| Shaft diameter, or circle diameter | mm | Shaft diameter (rollers around a shaft) or diameter of each small circle (other modes). |
| Rectangle width | mm | Rectangle width (rectangle mode). |
| Rectangle height | mm | Rectangle height (rectangle mode). |
Method and formulas
- Rollers around a shaft of radius R: roller diameter = 2R sin(π/n) ÷ (1 − sin(π/n)); outside diameter = shaft + 2 × roller.
- Smallest circle around N equal circles of diameter d: d × k, with k = 1, 2, 2.1547, 2.4142, 2.7013, 3, 3, 3.3048, 3.6131, 3.8130 for N = 1…10 (proven optimal packings).
- Rectangle: square grid ⌊W/d⌋ × ⌊H/d⌋; hexagonal rows of alternating ⌊W/d⌋ and ⌊(W − d/2)/d⌋ at a pitch of 0.866d.
- Example: 8 rollers around a 40 mm shaft are 24.797 mm each.
Limitations
- Rollers around a shaft touch each other and the shaft (no clearance); add running clearance in practice.
- Rectangle counts use simple regular patterns; better irregular packings may exist.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Design roller cages and needle-roller layouts
- Size a sleeve or tube for a bundle of bars
- Estimate parts per sheet or tubes per box
Who it is for
- Design engineers
- Toolmakers
- Estimators
What you get
- Roller diameter and ring outside diameter
- Enclosing circle diameter
- Circles per rectangle by square and hexagonal packing
Interpreting the result
- Allow clearance between rollers and for cage bars when designing bearings.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 88–94. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
Open the Rollers Around a Shaft and Circles in Circles calculator
