KEVOS® MAKEOS · Geometry
Ellipse Area and Perimeter
What area, perimeter and eccentricity does this ellipse have?
Area, perimeter (Ramanujan’s second approximation) and eccentricity of an ellipse from its two axes.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Major axis (full length) | mm | Longest overall dimension from the drawing. |
| Minor axis (full width) | mm | Shortest overall dimension, at right angles to the major axis. |
Method and formulas
- With semi-axes a and b: area = πab.
- Perimeter ≈ π(a + b)(1 + 3λ ÷ (10 + √(4 − 3λ))), λ = ((a − b) ÷ (a + b))².
- Eccentricity e = √(1 − b² ÷ a²); focal distance = a × e.
- Example: 400 × 300 mm gives an area of 94,248 mm² and a perimeter of 1,105.2 mm.
Limitations
- The perimeter formula is an approximation; its error is negligible for engineering ellipses.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Estimate gasket or seal length for elliptical manways
- Area of elliptical openings and cut-outs
- Lay out elliptical heads
Who it is for
- Design engineers
- Toolmakers
- Estimators
What you get
- Area
- Perimeter
- Eccentricity
- Focal distance from centre
Interpreting the result
- Add seam allowance or overlap when cutting seals or strips to the perimeter.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 48–50, 70–75. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
