KEVOS® MAKEOS · Power Transmission
Universal (Cardan) Joint Speed Variation
How much does the output speed of this universal joint vary over each revolution?
Maximum and minimum driven-shaft speed, speed variation and output speed at any rotation angle of a single universal (Cardan) joint working at an angle, with the matching torque variation.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Joint working angle | ° | Angle between the two shafts at the joint. |
| Driving shaft speed | rpm | Constant speed of the driving shaft. |
| Driving shaft position for the instantaneous speed | ° | Rotation of the driving yoke from the position where the driven shaft is fastest. |
| Input torque | N·m | Torque at the driving shaft. |
Method and formulas
- Maximum driven speed = n sec β; minimum = n cos β (handbook).
- Instantaneous ratio ω₂/ω₁ = cos β ÷ (1 − sin²β sin²θ), θ from the minimum-speed position.
- Torque varies inversely with speed (power constant, losses ignored).
- Example (handbook case): 100 rpm at 25° gives 110.34 and 90.631 rpm, a variation of 19.707 rpm.
Limitations
- Single joint; two joints correctly phased with equal angles cancel the variation.
- Inertia of the driven parts turns the speed variation into torque pulses.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Check whether a single universal joint is acceptable for a drive
- Explain vibration from a drive shaft at an angle
- Decide on a double joint or intermediate shaft
Who it is for
- Design engineers
- Maintenance engineers
- Automation engineers
What you get
- Maximum and minimum driven speed
- Total variation
- Instantaneous speed and torque at the chosen position
Interpreting the result
- Angles above about 20–25° should be avoided except at low speed and power; above 45° a single joint does not work well.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 2445–2446. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
Open the Universal (Cardan) Joint Speed Variation calculator
