KEVOS® MAKEOS · Fasteners
Set-Screw Holding Power and Torque
How much power and torque can set screws hold on this shaft, and how many do I need?
Safe power and torque a cup-point set screw can transmit without slipping by the handbook’s empirical formulas, the corresponding holding force at the shaft surface, and the number of set screws needed for a required power.
Open the calculatorRuns in your browser. No account needed.
How this tool works
Inputs, units and where to find them
| Input | Unit | Typical source |
|---|---|---|
| Shaft diameter | mm | Diameter of the shaft. |
| Set-screw diameter | mm | Nominal diameter of the set screw. |
| Shaft speed | rpm | Shaft speed. |
| Power to transmit | kW | Power the joint must transmit. |
Method and formulas
- Power per screw P = D N d^2.3 ÷ 50 hp, and torque T = 1250 D d^2.3 lb-in, with D and d in inches (converted here).
- Holding force at the shaft surface = T ÷ (D ÷ 2) ≈ 2500 d^2.3 lb (about 500 lb for a ½-in. screw, as the handbook lists).
- Handbook example: a ½-in. screw on a 1-in. shaft at 1000 rpm holds 4.1 hp.
- Example: a 12.7 mm set screw on a 25.4 mm shaft at 1000 rpm holds about 4.0613 hp.
Limitations
- Cup-point set screws seated on a plain shaft; varies with hardness of screw and shaft.
- Vibration and reversing loads loosen set screws: use a key for anything beyond light duty.
- Example values are illustrations. Replace them with values for your actual task.
Typical uses
- Check a set-screwed pulley, collar or gear on a shaft
- Decide whether to add a second set screw or a key
- Choose set-screw size for a light drive
Who it is for
- Design engineers
- Maintenance fitters
- Machine builders
What you get
- Power and torque per set screw
- Holding force at the shaft surface
- Set screws required
Interpreting the result
- Two screws at 90° hold more securely than one; a flat on the shaft also helps.
References
- Machinery’s Handbook, 29th edition (Industrial Press, 2012), printed pp. 1699–1700. Topic reference; no source tables or recommended settings are reproduced.
WORKOS tools are screening and decision-support utilities. Verify important financial, engineering, safety, legal or operational decisions using appropriate professional standards and your organisation’s approved data.
