← LibraryGlossary of Noncommutative Ring TheoryEngineering · Engineering MathematicsLesson 455/812← PrevNext →
ArticlePublished 8 Aug 2026Updated 9 Aug 202617 min readBy KEVOS®
Skip to content

Engineering Mathematics Foundation Reference

Glossary

Every technical term used across this collection, defined precisely and grouped by what it describes — ring classes, ideals and radicals, modules, idempotents, group rings and division algebras.

Page ID
KEVOS-ENG-MATH-NCR-0199
Taxonomy
ENG / ENG-MATH
Collection
noncommutative-rings-core
Source
Whole work
Reviewed
2026-08-08
Version
1.0.0

Executive Summary

Ring theory has a vocabulary problem: semisimple, semiprimitive, semiprime, semilocal, semiperfect and semiprimary are six different conditions, and two of them have swapped meanings historically. This page defines every term used across the collection, with hypotheses in full.

Entries are grouped by what they describe rather than alphabetically, because in this subject the useful question is almost never what does this word mean but what does it mean relative to the neighbouring conditions.

6Terms beginning 'semi-'
4Distinct radicals
3Meanings of 'primitive'
(4.14)Semisimple pinned down

Overview

The vocabulary is organised around one question: how far is a ring from being semisimple? Each term names a stage in the answer. Semilocal says the quotient by the radical is semisimple. Semiperfect adds that idempotents lift. Perfect adds T-nilpotency. Semiprimary adds nilpotence. Artinian adds a chain condition, and semisimple is the end of the line.

A second family — prime, semiprime, primitive, subdirectly irreducible — measures a different thing: how far a ring is from being a direct product of simpler pieces. The two families interlock but are not comparable, and confusing a member of one for a member of the other is the commonest terminological error in the subject.

Use with Notation Reference for the symbols and Ring Class Hierarchy for the containments between the classes named here.

Learning Objectives

  • Define semisimple, semiprimitive, semiprime, semilocal, semiperfect and semiprimary, and place them relative to each other.
  • State the definitions of prime, semiprime and primitive rings and give the element-wise reformulations.
  • Define radR, NilR, NilR and L-radR and give the chain of inclusions.
  • Distinguish primitive, local, basic and full idempotents.
  • Define nil, nilpotent, locally nilpotent and T-nilpotent and order them by strength.
  • Identify which terms carry a side and which do not.

Definitions

The dozen terms that appear on almost every page.

Ring
Associative with identity 10 unless stated otherwise; ring homomorphisms preserve the identity.
Simple module
A nonzero module with no submodules other than 0 and itself. Equivalently R/𝔪 for a maximal left ideal 𝔪.
Semisimple module
A direct sum of simple submodules. Equivalently every submodule is a direct summand (2.4). Submodules and quotients of semisimple modules are semisimple (2.2).
Semisimple ring
A ring for which RR is semisimple. Left semisimple implies right semisimple (3.7), so the adjective needs no side.
Jacobson radical
radR, the intersection of all maximal left ideals; equivalently the intersection of the annihilators of the simple left modules, and equally the intersection of the maximal right ideals.
Semiprimitive ring
radR=0. Lam writes *J-semisimple*; Anderson–Fuller and Rowen write semiprimitive; Jacobson wrote semisimple.
Left artinian ring
DCC on left ideals. By Hopkins–Levitzki (4.15) a left artinian ring is left noetherian; the converse is false.
Left primitive ring
A ring with a faithful simple left module (11.2). Left primitive does not imply right primitive.
Prime ring
𝔄𝔅=0 for ideals forces 𝔄=0 or 𝔅=0; equivalently aRb=0 forces a=0 or b=0 (10.16).
Local ring
R0 and R/radR is a division ring; equivalently the non-units form an additive subgroup (19.1).
Idempotent
e with e2=e. Two idempotents are orthogonal if ef=fe=0; e is central if it lies in Z(R).
Nilpotent, nil
An ideal 𝔄 is nilpotent if 𝔄n=0 for some n, and nil if every element is nilpotent. Nilpotent implies nil; the converse needs a chain condition (4.13).

Core Concepts

Ring classes

Simple ring
R0 with no two-sided ideals except 0 and R. Simple rings are left and right primitive (11.6) but need not be artinian — the Weyl algebra A1(k) in characteristic 0 is simple and not artinian.
Semiprime ring
𝔄2=0 forces 𝔄=0 for ideals; equivalently NilR=0; equivalently aRa=0 forces a=0.
Reduced ring
No nonzero nilpotent elements. Reduced implies semiprime; a reduced ring is a subdirect product of domains (12.7).
Subdirectly irreducible ring
R0 and the intersection of all nonzero ideals is nonzero (12.2). Every nonzero ring is a subdirect product of subdirectly irreducible rings (12.3).
Semilocal ring
R/radR is semisimple. A commutative ring is semilocal exactly when it has finitely many maximal ideals.
Semiperfect ring
Semilocal, with idempotents lifting modulo radR (23.1); equivalently 1 decomposes as a sum of orthogonal local idempotents (23.6).
Right perfect ring
R/radR is semisimple and radR is right T-nilpotent (23.18). Equivalently R satisfies DCC on principal left ideals (23.20) — the switch of sides is genuine.
Semiprimary ring
radR is nilpotent and R/radR is semisimple. Semiprimary implies both left and right perfect (23.19); one-sided artinian implies semiprimary.
Von Neumann regular ring
For every a there is x with axa=a (4.23). Regular implies semiprimitive; regular plus left noetherian gives semisimple (4.25).
Dedekind-finite ring
xy=1 implies yx=1. Fails in Endk(V) for dimkV infinite.
Indecomposable ring
R0 with no central idempotents besides 0 and 1; equivalently R is not a nontrivial direct product of rings (22.4).
Basic ring
A semiperfect ring R for which R/radR is a finite direct product of division rings (25.8). Every semiperfect ring is Morita equivalent to a basic one.
Division ring
R0 and every nonzero element is a unit. Commutative division rings are fields. A division ring is centrally finite if dimZ(R)R is finite.

Ideals and radicals

Prime ideal
An ideal 𝔭R with 𝔄𝔅𝔭 forcing 𝔄𝔭 or 𝔅𝔭; equivalently R/𝔭 is a prime ring (10.2).
Semiprime ideal
𝔄2𝔮 forces 𝔄𝔮; equivalently an intersection of prime ideals (10.11).
m-system
A set S such that for a,bS there is rR with arbS. Complements of prime ideals are exactly the m-systems (10.3).
n-system
A set S such that for aS there is r with araS; the multiplicative analogue for semiprime ideals (10.10).
Lower nilradical
NilR=(0), the intersection of all prime ideals; also called the Baer or prime radical (10.13).
Upper nilradical
NilR, the sum of all nil ideals; itself a nil ideal (10.26).
Levitzki radical
L-radR, the largest locally nilpotent ideal; NilRL-radRNilRradR (10.32).
Locally nilpotent set
Every finite subset generates a nilpotent subring without identity. Nilpotent implies locally nilpotent implies nil, both strictly.
T-nilpotent
A is left T-nilpotent if every sequence a1,a2, from A has a1a2an=0 for some n; right T-nilpotent reverses the order (23.13). Nilpotent implies T-nilpotent implies nil.
Primitive ideal
An ideal 𝔄 with R/𝔄 left primitive (11.3); equivalently the annihilator of a simple left module (11.4). radR is their intersection (11.5).
Augmentation ideal
The kernel of ε:kGk, aggag; free as a k-module on {g1:g1}.
Small submodule
NM is small (or superfluous) if N+L=M forces L=M (24.1). radM is the sum of all small submodules (24.4).

Modules

Faithful module
ann(M)=0.
Indecomposable module
Nonzero, and not a direct sum of two nonzero submodules.
Strongly indecomposable module
End(M) is a local ring. Strongly indecomposable implies indecomposable; the converse needs a finiteness hypothesis (19.17).
Composition series
A finite chain with simple factors. A module has one iff it is both noetherian and artinian (1.19); the factors are unique up to permutation by Jordan–Hölder.
Socle
soc(M), the sum of the simple submodules, equivalently the largest semisimple submodule.
Radical of a module
radM, the intersection of the maximal submodules (24.3). For M=R this recovers radR; for a general M it can be all of M.
Projective module
A direct summand of a free module (2.7); equivalently every epimorphism onto it splits.
Flat module
MR is exact (24.20). Projective implies flat; the converse holds exactly over right perfect rings (24.25).
Projective cover
An epimorphism PM with P projective and small kernel (24.9). Unique up to isomorphism when it exists (24.10).
Principal indecomposable module
A direct summand eR of RR with e a primitive idempotent (25.1); over a semiperfect ring these are the projective covers of the simple modules.

Idempotents and decompositions

Primitive idempotent
e0 that is not the sum of two nonzero orthogonal idempotents (21.15).
Local idempotent
e0 with eRe a local ring. Local implies primitive; over a semiperfect ring the two coincide (23.5).
Full idempotent
e with ReR=R. For such e, R and eRe are Morita equivalent (21.14).
Corner ring
eRe for an idempotent e; it is a ring with identity e, and End(eR)eRe (21.7).
Peirce decomposition
R=eReeR(1e)(1e)Re(1e)R(1e) for an idempotent e (21.1).
Lifting idempotents
Given an ideal I and a¯ idempotent in R/I, finding an idempotent eR with e+I=a¯. Always possible when I is nil (21.28).
Block
An indecomposable direct factor of R; equivalently Rei for a primitive central idempotent ei in the decomposition 1=e1++en (22.3).
Basic idempotent
An idempotent e such that eRe is a basic ring Morita equivalent to R; obtained by taking one idempotent from each isomorphism class of principal indecomposables (25.5).

Group rings, representations and division algebras

Group ring
kG=gGkg with multiplication induced from G (1.4).
Trivial unit
ag with aU(k), gG. Every group ring has these; whether it has others is Problem U (6.16).
p-group
A group with no element of order p. For finite groups this means p|G|.
FC group
A group all of whose elements have finitely many conjugates. Δ(G) denotes the subgroup of such elements (6.23); a torsion-free FC group is abelian (6.24).
Splitting field
A field k for a k-algebra A such that every simple A-module is absolutely irreducible, that is, remains simple under every field extension (7.4).
Absolutely irreducible module
A simple module V with End(V)=k; equivalently VkK is simple for every extension K/k.
Ordered group
A group with a total order satisfying g<hagb<ahb. For such G and a domain k, kG is a domain with only trivial units (6.29).
Cyclic algebra
(K/F,σ,a): built from a cyclic Galois extension K/F with group generated by σ and an element aF× (14.5).
Formally real ring
A ring in which a sum of squares vanishes only when every term does; the algebraic prerequisite for an ordering (17.11).
Positive cone
The set of non-negative elements of an ordered ring; closed under addition and multiplication and containing all squares (17.1).

Key Results

One theorem does more terminological work than any other: it is what makes semisimple and semiprimitive distinct yet related, and it justifies the placement of both in the hierarchy.

Theorem(4.14)Semisimple equals semiprimitive plus artinian

For a ring R with identity the following are equivalent: (1) R is semisimple, that is, RR is a direct sum of simple left submodules; (2) radR=0 and R is left artinian; (3) radR=0 and R satisfies DCC on principal left ideals.

Proof

**(1) (2).** Write RR=iISi with each Si simple. Since 1 lies in the sum, it has a nonzero component in only finitely many summands, and R=R1 then forces I to be finite: RR=S1Sn.

This gives a composition series 0S1S1S2R of length n, so RR is artinian and noetherian by (1.19). For the radical, put 𝔪i=jiSj. Then R/𝔪iSi is simple, so each 𝔪i is a maximal left ideal, and

radRi=1n𝔪i=0.
(G.1)

**(2) (1).** Consider the family of finite intersections of maximal left ideals of R. It is nonempty, so by DCC it has a minimal member I=𝔪1𝔪n. For any maximal left ideal 𝔪, the ideal I𝔪 lies in and is contained in I, so minimality gives I𝔪=I, that is, I𝔪. Hence IradR=0.

Therefore the natural map

Ri=1nR/𝔪i
(G.2)

has kernel 𝔪i=0, so RR embeds in a finite direct sum of simple modules. A submodule of a semisimple module is semisimple (2.2), so RR is semisimple.

**(2) (3)** is Lam's refinement: condition (3) says R is semiprimitive and right perfect, and the implication (3) (1) is proved by extracting an infinite descending chain of direct summands from a failure of semisimplicity.

CorollaryWhy settles the terminology

rad=p(p)=0, so is semiprimitive. It is not left artinian, since (2)(4)(8), so by (4.14) it is not semisimple. Any source calling semisimple is using the word in Jacobson's sense.

Comparison and Classification

Terms that name the same or nearly the same thing
Term used hereEquivalent or near-equivalent namesCaution
SemiprimitiveJ-semisimple; semisimple (pre-1970)the old usage is common in Jacobson and Herstein
Semisimplecompletely reducible; semisimple artinianNoether's school wrote completely reducible
Lower nilradicalBaer radical; prime radical; Baer lower radicalsymbols β(R), P(R), N(R)
Upper nilradicalnil radical; Baer upper radicalsymbol Nil(R)
Von Neumann regularabsolutely flat (commutative case)not 'regular' in the commutative-algebra sense
Small submodulesuperfluous submoduledual notion is essential or large
Principal indecomposableprojective indecomposable; PIMstandard in modular representation theory
Krull–Schmidt–AzumayaKrull–Remak–SchmidtAzumaya's version drops the finiteness on one side
Dedekind-finitedirectly finite; von Neumann finiteall three appear in the operator-algebra literature
Which conditions imply which
SemilocalSemiperfectRight perfectSemiprimarySemisimple
Left artinianyesyesyesyesno
Semiprimaryyesyesyesyesno
Right perfectyesyesyesnono
Semiperfectyesyesnonono
Localyesyesnonono
Semisimpleyesyesyesyesyes
Commutative noetherian localyesyesnonono

Which conditions imply which

Relationship Map

The vocabulary organises into two independent families plus a bridge.

  • Family A — distance from semisimplicity — measured by the radical
    • semilocal: quotient by the radical is semisimple
    • semiperfect: and idempotents lift
    • one-sided perfect: and the radical is T-nilpotent
    • semiprimary: and the radical is nilpotent
    • one-sided artinian: and a chain condition holds
    • semisimple: the radical is zero
  • Family B — indecomposability — measured by ideals
    • semiprime: no nonzero nilpotent ideal
    • prime: no two nonzero ideals multiply to zero
    • primitive: a faithful simple module exists
    • simple: no proper nonzero ideals
    • subdirectly irreducible: a smallest nonzero ideal exists
  • Bridge terms — belonging to both
    • semiprimitive: radR=0, and radR is the intersection of the primitive ideals (11.5)
    • reduced: no nilpotent elements, hence semiprime
    • von Neumann regular: semiprimitive, and semisimple exactly under a chain condition (4.25)
nilpotentT-nilpotentlocally nilpotentnil

For one-sided ideals; no arrow reverses. Locally nilpotent and T-nilpotent are not comparable in general, but both sit between nilpotent and nil.

Standards and Notation

Standards here covers notation, symbol and markup standards, and reference implementations, rather than material or design codes.

This collectionLam's terminology throughout: semisimple = artinian + zero radical
Jacobson (1964)semisimple means zero radical; completely reducible for our semisimple
Anderson–Fullersemiprimitive for zero radical; right modules by default
RowenJac(R); semiprimitive; extensive synonym tables
Passmangroup-ring terminology; Δ(G) for the FC subgroup
GAP / Magma / SageRadicalOfAlgebra, JacobsonRadical, A.radical()

There is no standards body for algebraic terminology; ISO 80000-2 governs symbols and typography only. In practice the convention is set by the textbook a community learned from, which is why the same ring can be called semisimple in one paper and semiprimitive in the next.

Failure Modes and Common Mistakes

  • Semiprime and semiprimitive differ: NilR=0 versus radR=0. The second implies the first, never the reverse.
  • Perfect always carries a side; semiperfect never does. The asymmetry is a theorem, not an oversight.
  • Local ring here does not include a noetherian hypothesis, and does not require commutativity.
  • Simple ring and simple module are unrelated conditions; a simple ring can have many non-isomorphic simple modules only if it is not artinian.

Best Practices

  • Define semisimple explicitly the first time you use it in any document, however standard you believe your convention to be.
  • Attach a side to every occurrence of artinian, noetherian, primitive and perfect.
  • When introducing a radical, say which one and give its defining property, not just its symbol.
  • Prefer the phrase zero Jacobson radical to any adjective when the audience is mixed.
  • Cite the numbered result that pins a definition down — (4.14) for semisimple, (23.18) for perfect, (19.1) for local — rather than relying on the word.

Historical Notes and Lessons Learned

  • 1893–1908Molien, Cartan, WedderburnAlgebras are classified; the radical is the largest nilpotent ideal and 'semisimple' names the quotient. The word already has its modern shape in the finite-dimensional case.
  • 1927–29Artin and NoetherChain conditions replace finite dimension; 'completely reducible' becomes the standard name for what is now called semisimple, and module language takes over.
  • 1945JacobsonThe radical is defined for arbitrary rings. Jacobson keeps 'semisimple' for zero radical, which is consistent with his own theory but conflicts with the older artinian usage.
  • 1950s–60sThe radicals multiplyBaer, Levitzki and Brown-McCoy radicals arrive, along with the upper and lower nilradical vocabulary and the star notation.
  • 1960BassPerfect and semiperfect rings are named; T-nilpotency enters the language, together with the deliberate side-switch in the definition of right perfect.
  • 1970s onwardResolution by textbookAnderson-Fuller and later Lam adopt semiprimitive for zero radical, restoring 'semisimple' to its artinian meaning. Both usages survive in the literature and neither is going away.

Terminology in this subject records its history rather than its logic. Each name was coined for the most general setting available at the time, and later generalisations left the old word attached to a narrower class. Reading a definition is therefore also reading a date.

Quick Reference

SemisimpleRR a direct sum of simples = radR=0 and left artinian
SemiprimitiveradR=0
SemiprimeNilR=0
SemilocalR/radR semisimple
Semiperfectsemilocal and idempotents lift
Right perfectsemilocal and radR right T-nilpotent
Semiprimarysemilocal and radR nilpotent
LocalR/radR a division ring
PrimeaRb=0a=0 or b=0
Left primitivea faithful simple left module exists
Reducedno nonzero nilpotent elements
Regularaxa=a is solvable for every a
Does the term carry a side?
TermSided?Reference
Jacobson radicalno(4.3)
Semisimpleno(3.7)
Semiperfectno(23.1)
Prime, semiprimeno(10.15)
Artinian, noetherianyes(1.24) shows the sides differ
PrimitiveyesBergman's example
Perfectyes(23.22)
T-nilpotentyes(23.13)

Frequently Asked Questions

What is the difference between semisimple and semiprimitive in one sentence?

Semiprimitive means radR=0; semisimple means that and left artinian, by (4.14). is the standard example separating them.

Why is semiperfect not sided when perfect is?

Because the definition of semiperfect — semilocal with idempotents lifting modulo the radical — is symmetric in its ingredients: semisimplicity of R/radR is side-neutral by (3.7), and idempotent lifting is a statement about the ideal radR. Perfectness adds T-nilpotency, and T-nilpotency genuinely depends on the order in which a sequence is multiplied; (23.22) exhibits a ring where the two orders differ.

Is a local ring necessarily noetherian or commutative?

Neither. In this subject a local ring is any nonzero ring whose quotient by its radical is a division ring (19.1). The commutative-algebra convention that includes noetherian is not used here. 𝔽pCp and the endomorphism ring of an indecomposable module of finite length are local and noncommutative.

What is the difference between primitive and local idempotents?

e is primitive if it is not a sum of two nonzero orthogonal idempotents; e is local if the corner ring eRe is a local ring. Local implies primitive always. The converse holds over semiperfect rings (23.5) but not in general.

Which terms in this glossary are Morita invariant?

Semisimple, semiprimitive, prime, semiprime, primitive, semilocal, semiperfect, perfect and von Neumann regular are all preserved by Morita equivalence, as are the radicals in the sense that radMn(R)=Mn(radR). Local and basic are not: Mn(k) for k local is semiperfect but not local, and Mn(R) is basic only when n=1.

How should I read a mid-century paper that never defines its terms?

Locate one theorem you already know and see which reading makes it true. If the paper asserts that a ring with zero radical is semisimple without a chain condition, it is using Jacobson's convention. If it says a semisimple ring is a finite product of matrix rings over division rings, it is using the artinian convention.

References

  1. T. Y. Lam, A First Course in Noncommutative Rings, Graduate Texts in Mathematics 131, Springer-Verlag, 1991 — definitions throughout, especially (2.1), (4.14), (10.15), (11.2), (19.1), (21.15), (23.1), (23.18) and (25.8).
  2. F. W. Anderson and K. R. Fuller, Rings and Categories of Modules, 2nd edition, Graduate Texts in Mathematics 13, Springer-Verlag, 1992.
  3. N. Jacobson, Structure of Rings, American Mathematical Society Colloquium Publications 37, revised edition, 1964.
  4. L. H. Rowen, Ring Theory, Volume I, Academic Press, 1988.
  5. I. N. Herstein, Noncommutative Rings, Carus Mathematical Monographs 15, Mathematical Association of America, 1968.
  6. D. S. Passman, The Algebraic Structure of Group Rings, Wiley-Interscience, 1977.

AI Suggested Questions

  • Give an example of a semilocal ring that is not semiperfect, and verify that idempotents fail to lift.
  • Which of the ring classes defined here are closed under passing to corner rings eRe?
  • How do the terms in this glossary map onto the naming conventions used in Lean's mathlib?
  • Construct a primitive idempotent that is not local, over an explicit ring.
  • What is the relationship between locally nilpotent and T-nilpotent one-sided ideals?
  • Trace how the meaning of 'radical' changed between Wedderburn, Jacobson and Amitsur.
  • Which of these classes are preserved by taking polynomial rings, and which by power series rings?
Page
KEVOS-ENG-MATH-NCR-0199
Path
Engineering / Mathematics
Template
kevos-knowledge-article-v2
KEVOS® Knowledge Library — reviewed 2026-08-08

Continue learning

Notation and Symbols ReferenceArticle · Engineering MathematicsNEXT LESSON →Study Pathway: A Route Through Noncommutative Ring TheoryArticle · Engineering MathematicsOpen Problems: Köthe, Kaplansky and the Group Ring ConjecturesArticle · Engineering MathematicsCatalogue of CounterexamplesArticle · Engineering Mathematics