Standard tables of number fields, elliptic curves, class numbers and factorisations, and how to use them responsibly.
Engineering / MathematicsSoftware, Tables and Sources8 min readKV-MATH-0678
Extensive tables exist for number fields, elliptic curves, class numbers and factorisations. They save enormous effort and are the single best source of test material.
What is tabulated
Standard tabulated data
Table
Indexed by
Typical contents
Number fields
Degree, signature, discriminant
Defining polynomial, class group, regulator, Galois group
Elliptic curves
Conductor
Model, rank, torsion, reduction data
Class numbers
Discriminant
Class number and group structure for quadratic fields
Factorisations
Number of special form
Known factors of numbers such as those in the Cunningham project
A table claiming to list all objects below a bound rests on a completeness argument, which is separate from the correctness of the individual entries.
Conditional entries
Building on tables
Using tabulated data
Verify a sampleRecompute several entries independently before trusting a table.
Record provenanceWhich table, which version, which conventions.
Carry conditionalityA result depending on a conditional entry is itself conditional.
Report discrepanciesA genuine disagreement is worth investigating and reporting.
Related resources
Software packages frequently ship with tabulated data built in — see software packages — which is usually the most convenient access route and carries the package's conventions.
Source. Henri Cohen, A Course in Computational Algebraic Number Theory, Springer GTM 138 — App. B. Structural reference unverified: the source file was not available during authoring; chapter and section numbers are taken from the published edition and have not been checked against a physical copy.
Handbook application: from concept to controlled practice
Purpose. This expanded section turns the original page into a practical handbook. It preserves the supplied material and adds a repeatable way to apply, check and review Published Tables of Fields and Curves. It does not replace a contract, legislation, a controlled standard, competent engineering judgement or specialist advice.
The operating aim is to turn a compact mathematical statement into a usable chain of definitions, claims, examples and checks. Read the original explanation first, then use the workflow and checks below to convert knowledge into evidence.
Treat Published Tables of Fields and Curves as a network of definitions and implications, not as a list of formulas. The working vocabulary on this page—tables, fields, curves, number, elliptic—should be made explicit before any proof or computation begins. Record the ambient set or structure, the permitted operations and the equality or equivalence relation in use. A compact theorem often changes meaning when the base field, finiteness condition, commutativity assumption or direction of an action changes.
For a proof, write the hypotheses as a checklist and mark the line at which each one is used. For a computation, state the representation of the input, the arithmetic model, the termination condition and the output invariant. For a classification problem, distinguish existence from uniqueness and distinguish an object from its representation. These separations prevent a correct local calculation from being mistaken for the general result.
A useful worked example should be small enough to inspect completely but rich enough to exercise the main mechanism. Compute the result in two ways where practical: symbolically and by substitution, structurally and numerically, or directly and through a normal form. Then include one near-miss example in which a hypothesis fails. The contrast explains why the theorem is shaped as it is and gives the reader a diagnostic pattern for later problems.
Verification is part of the mathematics. Check domains and codomains, substitute proposed solutions, test identity and zero cases, compare dimensions or cardinalities, and confirm that maps respect the required operations. In numerical work, report precision, conditioning and a residual rather than digits alone. In algorithmic work, separate mathematical correctness from implementation complexity and resource limits.
Step-by-step operating method
Fix the setting. State the objects, ambient structure, notation and assumptions before manipulating symbols.
Separate claims. Distinguish definitions, hypotheses, conclusions, equivalent conditions and consequences.
Choose a method. Select proof, construction, calculation or algorithm according to the question actually asked.
Work a small case. Use the smallest non-trivial example to expose the mechanism and test edge behaviour.
Verify independently. Substitute back, check invariants, test boundary cases or use an alternative derivation.
Worked-example protocol
Illustrative method—not a source theorem. Start with a small admissible input and list the definitions it must satisfy. Carry out each transformation on a separate line, citing the property that permits it. Preserve exact values until approximation is necessary. At the end, verify the output against the original definition and one invariant such as dimension, degree, determinant, order, norm or residual. Then alter one hypothesis and observe which step ceases to be valid. This protocol creates a reusable example without inventing a theorem-specific numerical answer.
Stage
Record
Quality check
Input
Objects, domain, notation, assumptions
Every symbol is defined
Method
Permitted operation or cited result at each step
All hypotheses hold
Output
Exact result and representation
Correct type, domain and form
Verification
Substitution, invariant or alternative derivation
Independent agreement
Boundary test
Zero, identity, degenerate or failed hypothesis
Scope is understood
Common failure modes and recovery actions
1. Watch for
Using a theorem without checking every hypothesis.
Recovery: Return to the governing definition or requirement and restate the decision in one sentence.
2. Watch for
Treating a suggestive example as a proof of the general case.
Recovery: Separate evidence from assumption, assign an owner and set a date for validation.
3. Watch for
Changing notation or conventions part-way through an argument.
Recovery: Run a small counterexample, boundary test, pilot or independent check before proceeding.
4. Watch for
Hiding a division-by-zero, convergence, finiteness or commutativity assumption.
Recovery: Record the consequence, decision and rationale, then update the controlled baseline.
5. Watch for
Reporting a computed result without a residual, substitution or structural check.
Recovery: Escalate when the issue affects safety, compliance, acceptance, material value or an agreed tolerance.
Review checklist
Can every symbol be traced to a definition or prior result?
Which hypothesis does each major step use?
Does the method cover zero, identity, degenerate and boundary cases?
Can the conclusion be checked by a second representation or calculation?
Are mandatory requirements distinguished from recommendations and illustrative values?
Are sources, assumptions, units, dates and versions recorded closely enough to reproduce the decision?
Have safety, legal, ethical, stakeholder and operational consequences been considered at the appropriate level?
Is there a named owner and a trigger for review, escalation, change or retirement?
Questions for deeper application
What is the most important distinction a practitioner must preserve when applying Published Tables of Fields and Curves?
Answer with a fact or cited source where available. Where evidence is incomplete, record the assumption, consequence, responsible owner and next validation action.
Which assumption about tables would change the result most if it proved false?
Answer with a fact or cited source where available. Where evidence is incomplete, record the assumption, consequence, responsible owner and next validation action.
What evidence would allow an independent reviewer to reproduce or challenge the conclusion?
Answer with a fact or cited source where available. Where evidence is incomplete, record the assumption, consequence, responsible owner and next validation action.
Which boundary, exception or failure case has not yet been tested?
Answer with a fact or cited source where available. Where evidence is incomplete, record the assumption, consequence, responsible owner and next validation action.
What must be handed over, monitored or reviewed after the immediate work is complete?
Answer with a fact or cited source where available. Where evidence is incomplete, record the assumption, consequence, responsible owner and next validation action.
Authoritative references and use notes
The sources below were selected as institutional or primary guidance for the broader practice. They support the handbook method; they do not imply that every statement or clause in a source applies to every project. Confirm the current edition, jurisdiction, contract and application before treating any requirement as mandatory.
MIT OpenCourseWare — Number Theory I — Massachusetts Institute of Technology. Used for algebraic and analytic number theory. Accessed 2026-08-13.
MIT OpenCourseWare — Algebra I — Massachusetts Institute of Technology. Used for groups, vector spaces, linear transformations and linear groups. Accessed 2026-08-13.
Implementation record: minimum fields
Create a compact record alongside the work. Include the purpose, context, responsible owner, stakeholders or affected users, inputs and sources, assumptions, method, acceptance or decision criteria, result, limitations, approval status, version and next review trigger. A reader should be able to understand not only what was concluded but why it was reasonable at the time.
Use plain language for decisions and reserve technical notation for places where it improves precision. Link every conclusion to the evidence that supports it. Where a source is secondary, old, proprietary or outside the applicable jurisdiction, note that limitation. Never silently turn a typical value, worked example, recommendation or software default into a mandatory requirement.
Handover and continual improvement
Before closing the work, identify what remains uncertain and who owns it. Transfer calculations, source records, models, approvals, test evidence, open actions and operating limits together. Agree how future users will recognise that the context has changed. Typical triggers include a new requirement, changed load or population, supplier or software revision, incident, repeated exception, capability shift, audit finding or adverse trend.
At the next review, compare the original assumptions with actual outcomes. Retain decisions that remain supported, correct weak controls and retire content that no longer reflects current practice. This feedback step converts a static article or template into a learning system and prevents old examples from becoming accidental policy.
